|
|
Order Inquiry | Website Search |
Pond Doc's Own ProBead and SuperPro Filters |
Shipping and Returns Policy |
||
| Online Water Garden Catalog |
Doc's Dream System Pond Kit
For Ponds or Water
Gardens -- 1000 to 2500 Gallons
Garden spaces can be made delightful with the addition of a pond. Double the enjoyment with a Doc's Dream System that is no more expensive than other pond systems (and less expensive than some) and is the lowest maintenance pond system available for the homeowner to install himself! Complete with illustrated instructions and Doc's own personal attention, his Dream System is truly a dream to install, operate and enjoy. We've come up with a kit that has all the equipment (except for a few things one can get cheaper at discount hardware stores) necessary to build an "average" state-of-the-art, low-maintenance Doc's Dream System.
This kit is designed for an "average pond" of 1000 to 2500 Gallons
Our definition of an "average pond" is one of natural shape consisting of a waterfall and possible small stream. Water is pulled from the bottom re-circulation drain via a pump capable of self-priming, through a bead filter (and maybe other optional equipment) then up to the top of the waterfall where it will flow gently on low (and energy-efficiently) or switch to high for heavier flow and during backwashing of the filter. The following factors must be true for this kit to work for you.
If you are planning a pond that fits all the factors we've listed, the recommended equipment for this kit will work brilliantly for you. If, for example, you want a 20-foot waterfall with cascading white-waters the pump chosen for the kit will not work for you. In that case, call us at (770) 663-6325 or email us for the equipment we would recommend so that you can be satisfied with the results.
| Basic Doc's Dream System Pond Kit for 1000 to 2500 Gallons | |
|
If the pump is to be located below pond water
level (Flooded Suction Application) |
If the pump is to be located above pond water
level and no more than 3 ft. from the edge of the pond (Self-Priming Application) |
| 20x20 Ft. Piece 45 mil EPDM Liner | 20x20 Ft. Piece 45 mil EPDM Liner |
| 25 ft. 52" Underlayment | 25 ft. 52" Underlayment |
| 2" Bottom Drain | 2" Bottom Drain |
| 2" Gate Valve | 2" Check Valve |
| 1 hp, 2 sp ProFlow™ External Pump | 1 hp, 2 sp ProFlow™ External Pump |
| 2" PVC Flex Hose (25 ft.) | 2" PVC Flex Hose (25 ft.) |
| Pump Quick Disconnects (2) | Pump Quick Disconnects (2) |
| ProBead™ 120 Bead Filter | ProBead™ 120 Bead Filter |
| SAVE! Purchase Complete Basic System | SAVE! Purchase Complete Basic System |
| Optional Equipment | |
| 25-watt Emperor Aquatics Ultraviolet Water Clarifier | Keeps the water clear of green water algae for ponds up to 1000 gallons full sun or 1400 gallons shade |
|
Adjusts the speed of the water through the UV for optimum performance and allows the unit to be easily taken off the system for winterization. |
|
|
| 40-watt Emperor Aquatics Ultraviolet Water Clarifier | Keeps the water clear of green water algae for ponds up to 1900 gallons full sun or 2500 gallons full shade |
|
Adjusts the speed of the water through the UV for optimum performance and allows the unit to be easily taken off the system for winterization. |
|
|
| 65-watt Emperor Aquatics Ultraviolet Water Clarifier | Keeps the water clear of green water algae for ponds up to 2600 gallons in full sun. |
|
Adjusts the speed of the water through the UV for optimum performance and allows the unit to be easily taken off the system for winterization. |
| Fish Safe Skimmer | Continually cleans floating debris from surface of water. |
|
|
Allows plumbing to go through the wall of the pond |
|
|
Adjusts the amount of flow through the skimmer |
|
|
Adjusts the amount of flow through the bottom drain -- should be used whenever the skimmer is installed |
20 x 20 Piece 45 mil EPDM Liner
| 45 mil EPDM Rubber Liner, 20 x 20 Ft. Piece | Item # -- Liner020020 | Order |
| Covers area no more than 10' across, 10' at widest and 3 1/2' at deepest. **This is a cut-goods piece and cannot be returned for credit. | Price (@ .85 sq. ft.)...$ 340.00 |
25 ft. 52" Underlayment (Don't forget to change the quantity to 25 ft - or to your specific needs)
| Green Underlayment, 52" Tall | Item # -- Under52 | Order |
| Priced by linear foot | Price (per linear ft)...$ 2.05 |
| 2"
Bottom Drain with Anti-Vortex Cover This unit comes with an anti-vortex cover for the safety of your fish. Made of PVC - PVC fittings must be used along with drain. Can you use a tube of E-6000 to Waterproof your Drain? Click HERE. |
Drain200 | $ 79.95 |
![]() |
Gate Valve Gate opens and closes to allow more or less water flow through. Connects to PVC. |
1 1/2" | GValve112 | $ 17.95 | |
| 2" | GValve200 | $ 21.95 |
![]() |
Check Valve Also known as a backflow preventer, it allows water to flow in only one direction. Connects to PVC. (Much better to use than standard spring-action valve found at most hardware stores because it does not restrict the flow like the spring-action valve does.) |
1 1/2" | CValve112 | $ 17.95 | |
| 2" | CValve200 | $ 24.95 | |||
| 3" | CValve300 | $ 43.95 | |||
| Click here to find more information about Check Valves | |||||
1 hp, 2 sp MaxFlow External Pump
[Store/Pumps/External/MFlow100.htm]
| PVC Flex Hose White, not ribbed hose is best to use when it is to be buried or if gluing like regular stiff PVC is desired. Prevents use of elbows and improves waterflow. |
1 1/2" | PXH112 | $ 2.25 per ft. | ||
| 2" | PXH200 | $ 3.00 per ft. |
![]() |
Male Threaded Quick Disconnect Allows quick removal of pump or UV unit by unscrewing. Connects to PVC. |
1 1/2" | QD112 | $ 12.95 | |
| 2" | QD200 | $19.95 |
Complete Basic
Doc's Dream System Kit
for Ponds 1000 to 2500 Gallons
Kits are shipped via common carrier and will add
$300 to $500 to the cost of the order. Your order will not reflect the
cost of shipping until it is charged. We will contact you with the cost of
shipping before the kit is shipped.
SAVE $ on cost of liner when complete kit is ordered.
| Flooded Suction Kit
(when the external pump is to be installed below the water
line of the pond) Includes: 20x20 liner / 25 ft. 52" Underlayment / 2" Bottom Drain / 2" Gate Valve / 1 hp, 2 sp ProFlow External Pump / 25 ft. 2" PVC Flex Hose / 2 ea. Pump Quick Disconnects / ProBead 120 Bead Filter / Complete Installation Instructions |
Basic2500FS $ 1785.00 |
|
| Self-Priming Kit
(when the external pump is to be installed above the water
line of the pond) Includes: 20x20 liner / 25 ft. 52" Underlayment / 2" Bottom Drain / 2" Check Valve / 1 hp, 2 sp ProFlow External Pump / 25 ft. 2" PVC Flex Hose / 2 ea. Pump Quick Disconnects / ProBead 120 Bead Filter / Complete Installation Instructions |
Basic2500SP $ 1788.00 |
OPTIONAL EQUIPMENT
Add an Ultraviolet Water Clarifier
Your system would take either a 25 or 40 watt Emperor unit, depending on the number of gallons and the amount of sunshine you will have on your pond. Please refer to the scale below to find the correct UV for your pond.
Smart UVs by Emperor Aquatics
All Emperor Smart UV Lights (with exception of the 65 watt and
130 watt units) below come with 2" Socket Ports.
1 1/2" Unions are sold separately. The 65 and 130 watt units have 3"
bodies and come with 1 1/2" unions installed.
| Watts | Dimensions | Port Size | Flow Rates |
Min / Max Gals Avg to Shady |
Min / Max Gals Full Sun |
Item # | Order |
| 18 | 22.75" x 3" | 2" | 300 to 500 gph | 500 / 1000 gals | 300 / 800 gals | EA02218-S / $229.95 | |
| 25 | 29" x 3" | 2" | 500 to 750 gph | 1000 / 1400 gals | 800 / 1200 gals | EA02225-S / $279.95 | |
| 40 | 43.75" X 3" | 2" | 750 to 950 gph | 1300 / 1900 gals | 1200 / 1700 gals | EA02240-S / 375.95 | |
| 65 | 70.5" x 3" | 1 1/2" Unions | 900 to 1300 gph | 2000 / 3000 gals | 1800 / 2600 gals | EA02065 / $629.95 | |
| 80 | 44.5" x 15.5" | 2" | 1200 to 1500 gph | 3000 / 4000 gals | 2400 / 3500 gals | EA02280-S / $629.95 | |
| 130 | 70.5" x 15.5" | 2" | 1500 to 2000 gph | 4000 / 5500 gals | 3500 / 5200 gals | EA02130 / $979.95 |
By-Pass for 25-watt Emperor Aquatics UV with 2" Quick Disconnects and Gate Valve
| Custom By-Pass with 2" Quick Disconnects and Gate Valve for 25-watt Emperor UV | # BPass25200 $79.95 |
By-Pass for 40-watt Emperor Aquatics UV with 2" Quick Disconnects and Gate Valve
| Custom By-Pass with 2" Quick Disconnects and Gate Valve for 40-watt Emperor UV | # BPass40200 $ 79.95 |
| 2" Quick Disconnects for Emperor Aquatics 2" Ports | # UVQD200 $ 12.95 |
| Fish
Safe Skimmer This skimmer can be installed directly into the side of the pond or without making a hole in the liner. It attaches to a PVC arm that protrudes from the wall of the pond via a bulk head fitting. Another method would be to use hard PVC and have it attach over the side of the pond. The basket inside the skimmer floats up with the water level which gives a little room for lower water levels before it begins to suck in air. |
AES750B | $ 119.95 |
© copyright 1997 - 2008 by PondDoc.com. All Rights Reserved.